L18/8671
650Watts RMS power, 97.5dB
Extended low frequency response down to 32 Hz
100mm/4inch high temperature copper voice coil with polyimide fiberglass former
High flexible M-roll cloth surround with deep corrugation for extended Xmax
Reinforced Conex spider to improve linearity control
Dual-forced air ventilation and 16mm back plate for minimum power compression
Double treated cone for water protection
Specification
General Specifications | ||
Nominal Diameter | 460/18 | mm/inch |
Rated Impedance | 8 | Ohm |
Nominal Power handling | 650 | Watts |
Program Power | 1300 | Watts |
Sensitivity(lw/lm) | 97 | dB |
Frequency Range | 3-2.2k | Hz |
Minimum Impedance(Zmin) | 5.8 | Ohm |
Voice Coil Diameter | 100/4 | mm/inch |
Voice Coil Material | Copper | |
Voice Coil Winding Depth | 23 | mm |
Number of layers | 2 | |
Magnet gap depth | 12 | mm |
Cone Shape | Curved | |
Surround Shape | M-roll | |
Basket | Cast Aluminum | |
Flux Density | 1.1 | T |
Magnet Material/Mass | Ceramic | |
Thiele-Small parameters | ||
Fs | 38 | Hz |
Re | 5.0 | Ohm |
Qms | 9.7 | |
Qes | 0.45 | |
Qts | 0.43 | |
Cms | 0.08 | mm/N |
Rms | 4.95 | mech-ohm |
Mms | 480 | gr |
Eff | 2.7 | % |
Bl | 23 | T.m |
Vas | 190 | liters |
Sd | 0.1257 | m2 |
Xmax | 8 | mm |
LelK | 1.96 | mH |
Mounting Information | ||
Overall Diameter | 461 | mm |
Bolt Circle Diameter | 439 | mm |
Bolt Hole Diameter | 6.5*9.5 | mm |
Baffle Cutout Diameter | 424 | mm |
Overall Depth | 200 | mm |