L10/83267
250W RMS Power
95dB sensitivity 1W/1m
62Hz-20K Hz frequency response range
64mm/2.5inch high-temperature copper voice coil with Kapton former
The horn is connected to a HF driver with 1 inch exit throat
Specification
| General Specifications | ||
| Nominal Diameter | 250/10 | mm/inch |
| Rated Impedance | 8 | Ohm |
| Nominal Power handling | 250 | Watts |
| Program Power | 500 | Watts |
| Sensitivity(lw/lm) | 95 | dB |
| Frequency Range | 62-20K | Hz |
| Minimum Impedance(Zmin) | 6.6 | Ohm |
| Voice Coil Diameter | 64/2.5 | mm/inch |
| Voice Coil Material | Copper clad aluminium | |
| Voice Coil Winding Depth | 16 | mm |
| Number of layers | 2 | |
| Magnet gap depth | 8 | mm |
| Former Material | Kapton | |
| Surround Shape | M-Roll | |
| Basket | Cast Aluminum | |
| Flux Density | 1.1 | T |
| Magnet Material/Mass | Ceramic | |
| Thiele-Small parameters | ||
| Fs | 62 | Hz |
| Re | 5.6 | Ohm |
| Qms | 8.2 | |
| Qes | 0.38 | |
| Qts | 0.37 | |
| Cms | 0.08 | mm/N |
| Rms | 1.49 | mech-ohm |
| Mms | 31.6 | gr |
| Eff | 2.1 | % |
| Bl | 13.4 | T.m |
| Vas | 35 | Liters |
| Sd | 0.0345 | m2 |
| Xmax | 4 | |
| LelK | 0.8 | mH |
| Mounting Information | ||
| Overall Diameter | 261 | mm |
| Bolt Circle Diameter | 246 | mm |
| Bolt Hole Diameter | 5*7 | mm |
| Baffle Cutout Diameter | 232 | mm |
| Overall Depth | 140 | mm |
